1. Home
  2. Curtains
  3. Blackout
  4. Blackout curtains
  5. Beige BLACKOUT Curtain Solid Color Fawn MC44

Beige BLACKOUT Curtain Solid Color Fawn MC44

Blackout curtains and liningsThermal curtains and liningsSoundproof curtains

> Curtain technical performance

Solid-Colored Blackout Curtain
The Moondream Solid Color BEIGE Blackout Curtain is a two-in-one technical solution that dresses windows... More

> Why Moondream ?

> How to measure my curtains ?

> How to hang my pencil pleat curtains ?

> How to hem my Moondream curtains?

More details

* Sold individually

Weight per unit: 1.70 lbs

$29

Beige BLACKOUT Curtain Solid Color Fawn MC44

The Moondream Solid Color BEIGE Blackout Curtain is a two-in-one technical solution that dresses windows with stylish fabrics and gives you the option to block out up to 100% of the light whenever you wish. Sturdy, easy to maintain and height adjustable, Moondream Solid Color Blackout Curtains provide a fitting last touch to your decorating schemes.

  • Moondream curtains promise a blackout effect up to 100% (laboratory tested*).
  • Heavy fabric provides a lovely hanging effect. 
  • Grommets are machine-washable and rust-proof.
  • Grommets are spaced at regular intervals to avoid crimping the fabric. 
  • Grommet has 1.6-inch inner diameter.
  • Each Pencil Pleat panel is sewn with 2.8 inches pencil pleat curtain tape.
  • Pencil pleat consists of tightly gathered folds (Plastic hooks furnished).
  • Reinforced top section, made without stitching, provides a flawless overall appearance.
  • Regular side seams are made with a small and discreet stitching.
  • Overedge stitching is made with invisible thread and has a seamless effect.
  • Easily adjustable to the height of your windows with iron-on tape (provided)-Bottom sewn with an overcast seam.
  • Mashine-washable.
  • Products are made in Europe (Poland) with the utmost care.
 
To ensure you find the most reliable information, in a single overview, all results for this Beige BLACKOUT Curtain Solid Color Fawn MC44 :

Moondream blackout curtains technical performanceMoondream blackout curtains performance

*Report N°M109 of the ENVEHO bureau dated June 2011

For prime quality

Moondream curtain VS. standard curtain



For the best technical performance

Tests carried out by an independent laboratory.

30 other products

How to hang my rod pocket & pencil pleats curtains ?


APPLICATION


3 WAYS TO HANG PENCIL PLEAT CURTAINS


  • 1st OPTION:
    Lay the curtain flat, and use a rod with clip rings (not provided) to attach and to hang your curtain.


    Step 1 iron-on-tape Step 2 iron-on-tape


    Step 1 iron-on-tape Step 2 iron-on-tape


  • 2nd OPTION:
    With classic metal rings: Insert the provided plastic hooks inside the braid every 3.4 or 6 inches on the back of your curtain. Insert the hooks into the rings to hang your curtain.


    Step 1 iron-on-tape Step 2 iron-on-tape


  • With a traverse rod: Insert the provided plastic hooks inside the braid every 3.4 or 6 inches on the back of your curtain. To pleat and frown your curtain pull the strings on both sides. Your curtain is ready to be hung into the hooks of your traverse rod.


    Step 1 iron-on-tape Step 2 iron-on-tape


  • 3nd OPTION - THIS OPTION DOES NOT EXIST FOR THE PENCIL PLEAT CURTAINS ON SALE:
    If the curtain has an opening on both ends, than you may use a standard curtain rod, and insert the rod into one end, therefore using it as a “Rod-Pocket” curtain.


    Step 1 iron-on-tape Step 2 iron-on-tape

> Identify my need

How to measure my curtains ?

 

The measurements vary slightly depending on the type of curtains to be hung.


Choosing curtain height

The height of your curtains is the distance measured from the top of the curtain rail to the floor.
If you prefer curtains that do not touch the floor, reduce the measured height by 0.8 in (2 cm).
For a more decorative aspect with curtains that fall to the floor, add 1.6 to 2 in (4 to 5 cm) to the measured
height. Curtains that "break" at the floor accentuate the ceiling height in the room.
Whatever you choose, all Moondream curtains are delivered with a heat-activated adhesive band so that you can
adapt your curtains to the height you wish.
We recommend that you hang your curtains to measure where to place the hem.

Special case of grommet curtains
Plan to leave 1 in (2.5 cm) between the top of the curtain rail and your ceiling.
This space will be taken up by the material above the grommets.


Choosing curtain width

Measure the distance between one end of the rail and the other (not including decorative tips).
Remember that the stated dimensions always correspond to the flat curtains.
When taking the measurements, take the specific type of curtain attachment system into account.

  • For curtains with pencil pleats
    For a highly pleated effect, multiply the measurement by 1.5.
    Moondream curtains are sewn with 2.8 in (7 cm) wide pencil pleats.
    Once hung, you simply need to pull on the strings at each end of the pencil pleats to create the desired pleat.

  • For grommet curtains
    Moondream curtains are made with 8 grommets and the top of the curtains is reinforced and blind hem stitched,
    which means that they fall elegantly to the floor to add just the right touch to any interior.
    The diameter of the grommets is 1.6 in (4 cm).
    When the curtains are folded back, the width of the panel is approximately 5.9 in (15 cm).

 

How to measure my curtains

 

How to hem my Moondream curtains?

It is so easy to hem your curtain without sewing!

 


All our Moondream® curtains are delivered with a iron-on-tape enabling you to adjust the dimensions of your curtains to fit your windows.

N.B.: Given the weight of the sound insulation curtain (up to 6.61 pounds), we recommend adding a few stitches post-application to secure the iron-on-tape in place.

APPLICATION

  1. Measure how long you want your curtains to be and lay the curtain with the reverse side facing upwards.
    Fold up the hem and iron the fold (without the iron-on-tape).
  2. Place the iron-on-tape inside the fold.
  3. Iron with a pressing action.
    The curtain is ready to be install!

 

1.
Step 1 iron-on-tape		 2.
Step 2 iron-on-tape		 3.
Step 3 iron-on-tape